Comparar productos

  Comparar 0 productos
¡Compra con confianza, todo lo que ves está en stock y tiene su precio actualizado. Envíos rápidos y seguros a todo el país!

Inicio Memoria Ram DDR4 16GB (2x8)

Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16
Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16
Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16
Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16
Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16
Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16

* Las imágenes se exhiben con fines ilustrativos.

Memoria Ram DDR4 16GB (2x8) Kingston Fury Beast 3600MHz RGB KF436C17BBAK2/16

740617319088
Kingston
Sin stock
Envíos a todo el país
Retirá en MyM Computacion | Gaming Store.
  • Compartir:
- SPECIFICATIONS
KF436C17BBAK2/16
16GB (8GB 1G x 64-Bit x 2 pcs.)
DDR4-3600 CL17 288-Pin DIMM Kit
Continued
FEATURES
FURY KF436C17BBAK2/16 is a kit of two 1G x 64-bit (8GB)
DDR4-3600 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 1G x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel®
XMP) 2.0. Total kit capacity is 16GB. Each module has been tested
to run at DDR4-3600 at a low latency timing of 17-21-21 at 1.35V.
The SPDs are programmed to JEDEC standard latency DDR4-2400
timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact
fingers. The JEDEC standard electrical and mechanical
specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
260ns(min.)
32ns(min.)
94 V - 0
0o
C to +85o
C
-55o
C to +100o
C
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
• XMP Profile #1: DDR4-3600 CL17-21-21 @1.35V
• XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.62” (41.2mm), w/heatsink